Vulcan-hart GDC48 ML-52583 Bedienungsanleitung

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791FORM 30501 (Rev. A, 11-95)GDC SERIES GAS DUPLEX COOKERSMODELSGDC24 ML

— 10 —After Each UseClean the griddle with a flexible spatula or griddle scraper. Take care not to contact the platen surfacesas these can be easily

— 11 —• DO NOT - Use grill cleaners on the platen.Life of the non-stick coating of the platen will vary depending upon the product cooked and the cook

— 12 —Tools required:7/16 socket (magnetic) 1/4 drive1/4 drive universal joint1/4 drive 6" extension1/4 drive ratchet1. Remove platen cover (Fig.

— 13 —5. Tighten all bolts and nuts firmly (do not overtighten), with 7/16 wrench, in numerical order as shownin the diagram (Fig. 7). CAUTION: Over

— 14 —TROUBLESHOOTINGPROBLEMRed light won't come on when main switch is on.Red light won't go off when Main On-Off or Thermostatswitch is on

— 15 —PROBLEMHeat doesn't turn off; amber light is off; temperatureis above thermostat setting.Heat doesn't turn off; amber light is on; tem

— 16 —FORM 30501 (Rev. A, 11-95)

— 2 —IMPORTANT FOR YOUR SAFETYTHIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GASEQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD STAR

— 3 —Installation, Operation and Care ofGDC SERIES GAS DUPLEX COOKERSKEEP THESE INSTRUCTIONS FOR FUTURE USEGENERALThe GDC Series Gas Duplex Cookers co

— 4 —INSTALLATION CODES AND STANDARDSThe GDC Series Gas Duplex Cookers must be installed in accordance with:In the United States:1. State and local co

— 5 —Stand (Fig. 1)1. Thread leg extension into fixed nut in griddle frame.2. Thread adjustable leg through undershelf into leg extension.3. Tighten b

— 6 —When test pressures are 1/2 psig (3.45 kPa) or less, the cooker must be isolated from the gas supplypiping system by closing its individual shuto

— 7 —OPERATIONWARNING: THE DUPLEX COOKER AND ITS PARTS ARE HOT. BE CAREFUL WHEN OPERATING,CLEANING, AND SERVICING THE DUPLEX COOKER.CONTROLS (Fig. 2

— 8 —BEFORE FIRST USEThe griddle plate is shipped with a protective coating. Remove this coating before cooking with griddle.Clean the griddle with a

— 9 —PREHEAT GRIDDLECAUTION: Care must be exercised not to overheat the griddle plate by setting the thermostatswell above recommended temperatures.