Vulcan-Hart GCO2D Spezifikationen PDF herunterladen (Seite 22)

— 22 —

MAINTENANCE

WARNING: TURN OVEN OFF AND UNPLUG ELECTRICAL CORD BEFORE PERFORMING ANY

MAINTENANCE.

LUBRICATION

The fan motor comes with sealed bearings and requires no lubrication.

The door hinges and mechanism require occasional lubrication with mineral oil.

DISCONNECTING THE GAS LINE RESTRAINT

If this oven is placed on casters, it should be connected to the supply piping with the proper disconnect device

and restraint. If it is necessary to disconnect the restraint, first turn off the gas supply. Reconnect the restraint

before turning the gas supply on and returning the oven to its original installation position.

VENT

Annually check the flue, when cool, to be sure it is free of obstructions.

REPLACING LAMPS

• Remove all racks by pulling forward, lifting up and out.

• Remove the right rack support by lifting up.

• Unscrew glass dome from light body.

• Replace the bulb.

• Reassemble glass dome, rack support and racks by reversing the disassembly procedure.

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning this oven, contact the Vulcan-Hart Service Agency in your

area (refer to listing supplied with the oven), or Vulcan-Hart Company Service Department at the address or

phone number shown on the front cover of this manual.

1 2 ... 17 18 19 20 21 22 23 24

Keine Kommentare

Vulcan-Hart GCO2D Spezifikationen Seite 22